EnviroSenze 10 is an environmentally friendly foam mimic concentrate with non-foaming properties. It is designed to be used when testing and commission foam systems. The foam mimic concentrate has been designed to have similar flow behaviour as traditional foam concentrate but has no foaming agents inside. The foam mimic concentrate can also be used to determine induction ratio as measured by conductivity. The same foam mimic concentrate can be used for 1%, 3% and 6% systems. The lower detection limit is around 0,2% induction using ordinary tap water. The viscosity of EnviroSenze 10 is set be around 10 mPas. This mimics a typical AFFF foam concentrate with low viscosity. The viscosity is approximate and can vary from batch to batch. Since viscosity also changes by temperature it is advisable to always measure the viscosity of the foam mimic solution before use.
-
EnviroSenze 800 is an environmen-tally friendly foam mimic concentrate with non-foaming properties. It is designed to be used when testing and commission foam systems. The foam mimic concentrate has been designed to have similar flow behaviour as traditional foam concentrate but has no foaming agents inside. The foam mimic concentrate can also be used to determine induction ratio as measured by conductivity. The same foam mimic concentrate can be used for 1%, 3% and 6% systems. The lower detection limit is around 0,2% induction using ordinary tap water. The viscosity of EnviroSenze 800 is set be around 800 mPas. This mimics an alcohol resistant foam concentrate in the lower viscosity range. The viscosity will not be exactly 800 mPas, but rather around this value. The viscosity can vary from batch to batch between 700 and 900 mPas. Since viscosity also changes by temperature it is advisable to always measure the viscosity of the foam mimic solution before use. -
EnviroSenze 2500 is an environment-tally friendly foam mimic concentrate with non-foaming properties. It is designed to be used when testing and commission foam systems. The foam mimic concentrate has been designed to have similar flow behaviour as traditional foam concentrate but has no foaming agents inside. The foam mimic concentrate can also be used to determine induction ratio as measured by conductivity. The same foam mimic concentrate can be used for 1%, 3% and 6% systems. The lower detection limit is around 0,2% induction using ordinary tap water. The viscosity of EnviroSenze 2500 is set be around 2500 mPas. This mimics an alcohol resistant foam concentrate in the lower viscosity range. The viscosity will not be exactly 2500 mPas, but rather around this value. The viscosity can vary from batch to batch between 1500 and 3000 mPas. Since viscosity also changes by temperature it is advisable to always measure the viscosity of the foam mimic solution before use. -
Fomtec FFFP ARC 3x6 is a multi purpose alcohol resistant film forming fluoroprotein foam concentrate (FFFP ARC). The main advantage of Fomtec FFFP ARC 3x6 is the 3% induction ratio on hydrocarbon fires and 6% on polar solvents. Fomtec FFFP ARC 3x6 has been designed to perform as a high efficiency film forming fluoroprotein foam on hydrocarbon fires, and as “alcohol resistant” foam, creating a polymeric membrane on polar solvent fires. Fomtec FFFP ARC 3x6 provides reliable performance even on the strongest fuels. Its excellent fire performance on all kinds of flammable liquids, low or medium expansion, provides maximum security in both mobile fire fighting and stationary fire protection. -
Fomtec FP 3% is a flouroprotein foam concentrate containing flourinated surfactants in a carefully formulated protein foam liquid base. This ensures the production of stabilised fluid foam which will cover a burning hydrocarbon fuel surface rapidly. The water soluble flourosurfactant makes the foam hydrocarbon repellent and reduces the amount of burning particles absorbed by the foam in fighting the hydrocarbon fuel fires. Once the fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re ignition and provides excellent protection against burn back should any inaccessible pockets of fire remain. Fomtec FP 3% should be used at 3% proportioned solution (3 part concentrate in 97 parts of water) in fresh or seawater. -
Fomtec FP 3% UL is a flouroprotein foam concentrate containing flourinated surfactants in a carefully formulated protein foam liquid base. This ensures the production of stabilised fluid foam which will cover a burning hydrocarbon fuel surface rapidly. The water soluble flourosurfactant makes the foam hydrocarbon repellent and reduces the amount of burning particles absorbed by the foam in fighting the hydrocarbon fuel fires. Once the fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re ignition and provides excellent protection against burn back should any inaccessible pockets of fire remain. Fomtec FP 3% UL should be used at 3% proportioned solution (3 part concentrate in 97 parts of water) in fresh or seawater. -
Fomtec FP 6% is a flouroprotein foam concentrate containing flourinated surfactants in a carefully formulated protein foam liquid base. This ensures the production of stabilised fluid foam which will cover a burning hydrocarbon fuel surface rapidly. The water soluble flourosurfactant makes the foam hydrocarbon repellent and reduces the amount of burning particles absorbed by the foam in fighting the hydrocarbon fuel fires. Once the fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re ignition and provides excellent protection against burn back should any inaccessible pockets of fire remain. Fomtec FP 6% should be used at 6% proportioned solution (6 part concentrate in 94 parts of water) in fresh or seawater. -
Fomtec FP 6% UL is a flouroprotein foam concentrate containing flourinated surfactants in a carefully formulated protein foam liquid base. This ensures the production of stabilised fluid foam which will cover a burning hydrocarbon fuel surface rapidly. The water soluble flourosurfactant makes the foam hydrocarbon repellent and reduces the amount of burning particles absorbed by the foam in fighting the hydrocarbon fuel fires. Once the fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re ignition and provides excellent protection against burn back should any inaccessible pockets of fire remain. Fomtec FP 6% UL should be used at 6% proportioned solution (6 part concentrate in 94 parts of water) in fresh or seawater. -
Fomtec P 3% is protein foam produced from a carefully controlled blend of hydrolised protein, foam boosters, stabilisers and preservatives. This ensures the production of stabilised fluid foam. Foam produced by foam making equipment is tough, stable, heat resistant and covers the burning hydrocarbon fuel surface rapidly. Once fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re-ignition and provides excellent protection against 'burn-back' should any inaccessible pockets of fire remain. Fomtec P 3% should be used as a 3% proportioned solution in fresh or sea water. The correct proportioning or mixture ratio is 3 parts of concentrate and 97 parts of water. -
Fomtec P 6% is protein foam produced from a carefully controlled blend of hydrolised protein, foam boosters, stabilisers and preservatives. This ensures the production of stabilised fluid foam. Foam produced by foam making equipment is tough, stable, heat resistant and covers the burning hydrocarbon fuel surface rapidly. Once fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re-ignition and provides excellent protection against 'burn-back' should any inaccessible pockets of fire remain. Fomtec P 6% should be used as a 6% proportioned solution in fresh or sea water. The correct proportioning or mixture ratio is 6 parts of concentrate and 94 parts of water. -
Fomtec Trainer E-Lite is a carefully selected blend of natural origin surfactants, solvents and stabilisers and is 100% biodegradable. It is designed for training purpose on all class A and B fires with minimum environmental impact. Fomtec Trainer E-Lite does not contain any hazardous substances and does not require any special labelling when transported. -
Fomtec FFFP 6% ICAO is a film forming fluoroprotein foam concentrate (FFFP) containing hydrolysed protein and preservatives, together with a blend of fluorinated surfactants to achieve the maximum synergistic effect. The blend of fluorochemicals selected is effective in reducing the surface tension of water as well as the interfacial tension between water and oil sufficiently low to give stable film on the surface of the fuel and as a result it gives fire extinguishing rates superior to those obtained with synthetic based compounds. Incorporation of protein in the formulation produces a thick visible blanket which has exceptional burnback resistance. Fomtec FFFP 6% ICAO should be used as a 6% proportioned solution in fresh or sea water. The correct proportioning or mixture ratio is 6 parts of concentrate and 94 parts of water.