EnviroSenze 2500 is an environment-tally friendly foam mimic concentrate with non-foaming properties. It is designed to be used when testing and commission foam systems. The foam mimic concentrate has been designed to have similar flow behaviour as traditional foam concentrate but has no foaming agents inside. The foam mimic concentrate can also be used to determine induction ratio as measured by conductivity. The same foam mimic concentrate can be used for 1%, 3% and 6% systems. The lower detection limit is around 0,2% induction using ordinary tap water. The viscosity of EnviroSenze 2500 is set be around 2500 mPas. This mimics an alcohol resistant foam concentrate in the lower viscosity range. The viscosity will not be exactly 2500 mPas, but rather around this value. The viscosity can vary from batch to batch between 1500 and 3000 mPas. Since viscosity also changes by temperature it is advisable to always measure the viscosity of the foam mimic solution before use.
-
EnviroSenze 800 is an environmen-tally friendly foam mimic concentrate with non-foaming properties. It is designed to be used when testing and commission foam systems. The foam mimic concentrate has been designed to have similar flow behaviour as traditional foam concentrate but has no foaming agents inside. The foam mimic concentrate can also be used to determine induction ratio as measured by conductivity. The same foam mimic concentrate can be used for 1%, 3% and 6% systems. The lower detection limit is around 0,2% induction using ordinary tap water. The viscosity of EnviroSenze 800 is set be around 800 mPas. This mimics an alcohol resistant foam concentrate in the lower viscosity range. The viscosity will not be exactly 800 mPas, but rather around this value. The viscosity can vary from batch to batch between 700 and 900 mPas. Since viscosity also changes by temperature it is advisable to always measure the viscosity of the foam mimic solution before use. -
EnviroSenze 10 is an environmentally friendly foam mimic concentrate with non-foaming properties. It is designed to be used when testing and commission foam systems. The foam mimic concentrate has been designed to have similar flow behaviour as traditional foam concentrate but has no foaming agents inside. The foam mimic concentrate can also be used to determine induction ratio as measured by conductivity. The same foam mimic concentrate can be used for 1%, 3% and 6% systems. The lower detection limit is around 0,2% induction using ordinary tap water. The viscosity of EnviroSenze 10 is set be around 10 mPas. This mimics a typical AFFF foam concentrate with low viscosity. The viscosity is approximate and can vary from batch to batch. Since viscosity also changes by temperature it is advisable to always measure the viscosity of the foam mimic solution before use. -
Fomtec Trainer E-Lite is a carefully selected blend of natural origin surfactants, solvents and stabilisers and is 100% biodegradable. It is designed for training purpose on all class A and B fires with minimum environmental impact. Fomtec Trainer E-Lite does not contain any hazardous substances and does not require any special labelling when transported. -
Fomtec P 6% is protein foam produced from a carefully controlled blend of hydrolised protein, foam boosters, stabilisers and preservatives. This ensures the production of stabilised fluid foam. Foam produced by foam making equipment is tough, stable, heat resistant and covers the burning hydrocarbon fuel surface rapidly. Once fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re-ignition and provides excellent protection against 'burn-back' should any inaccessible pockets of fire remain. Fomtec P 6% should be used as a 6% proportioned solution in fresh or sea water. The correct proportioning or mixture ratio is 6 parts of concentrate and 94 parts of water. -
Fomtec P 3% is protein foam produced from a carefully controlled blend of hydrolised protein, foam boosters, stabilisers and preservatives. This ensures the production of stabilised fluid foam. Foam produced by foam making equipment is tough, stable, heat resistant and covers the burning hydrocarbon fuel surface rapidly. Once fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re-ignition and provides excellent protection against 'burn-back' should any inaccessible pockets of fire remain. Fomtec P 3% should be used as a 3% proportioned solution in fresh or sea water. The correct proportioning or mixture ratio is 3 parts of concentrate and 97 parts of water. -
Fomtec FP 6% UL is a flouroprotein foam concentrate containing flourinated surfactants in a carefully formulated protein foam liquid base. This ensures the production of stabilised fluid foam which will cover a burning hydrocarbon fuel surface rapidly. The water soluble flourosurfactant makes the foam hydrocarbon repellent and reduces the amount of burning particles absorbed by the foam in fighting the hydrocarbon fuel fires. Once the fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re ignition and provides excellent protection against burn back should any inaccessible pockets of fire remain. Fomtec FP 6% UL should be used at 6% proportioned solution (6 part concentrate in 94 parts of water) in fresh or seawater. -
Fomtec FP 6% is a flouroprotein foam concentrate containing flourinated surfactants in a carefully formulated protein foam liquid base. This ensures the production of stabilised fluid foam which will cover a burning hydrocarbon fuel surface rapidly. The water soluble flourosurfactant makes the foam hydrocarbon repellent and reduces the amount of burning particles absorbed by the foam in fighting the hydrocarbon fuel fires. Once the fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re ignition and provides excellent protection against burn back should any inaccessible pockets of fire remain. Fomtec FP 6% should be used at 6% proportioned solution (6 part concentrate in 94 parts of water) in fresh or seawater. -
Fomtec FP 3% UL is a flouroprotein foam concentrate containing flourinated surfactants in a carefully formulated protein foam liquid base. This ensures the production of stabilised fluid foam which will cover a burning hydrocarbon fuel surface rapidly. The water soluble flourosurfactant makes the foam hydrocarbon repellent and reduces the amount of burning particles absorbed by the foam in fighting the hydrocarbon fuel fires. Once the fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re ignition and provides excellent protection against burn back should any inaccessible pockets of fire remain. Fomtec FP 3% UL should be used at 3% proportioned solution (3 part concentrate in 97 parts of water) in fresh or seawater. -
Fomtec FP 3% is a flouroprotein foam concentrate containing flourinated surfactants in a carefully formulated protein foam liquid base. This ensures the production of stabilised fluid foam which will cover a burning hydrocarbon fuel surface rapidly. The water soluble flourosurfactant makes the foam hydrocarbon repellent and reduces the amount of burning particles absorbed by the foam in fighting the hydrocarbon fuel fires. Once the fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re ignition and provides excellent protection against burn back should any inaccessible pockets of fire remain. Fomtec FP 3% should be used at 3% proportioned solution (3 part concentrate in 97 parts of water) in fresh or seawater. -
Fomtec FFFP ARC 3x6 is a multi purpose alcohol resistant film forming fluoroprotein foam concentrate (FFFP ARC). The main advantage of Fomtec FFFP ARC 3x6 is the 3% induction ratio on hydrocarbon fires and 6% on polar solvents. Fomtec FFFP ARC 3x6 has been designed to perform as a high efficiency film forming fluoroprotein foam on hydrocarbon fires, and as “alcohol resistant” foam, creating a polymeric membrane on polar solvent fires. Fomtec FFFP ARC 3x6 provides reliable performance even on the strongest fuels. Its excellent fire performance on all kinds of flammable liquids, low or medium expansion, provides maximum security in both mobile fire fighting and stationary fire protection. -
Fomtec FFFP ARC 3x3 is a multi purpose alcohol resistant film forming fluoroprotein foam concentrate (FFFP ARC). The main advantage of Fomtec FFFP ARC 3x3 is the 3% induction ratio on hydrocarbon fires and 3% on polar solvents. Fomtec FFFP ARC 3x3 has been designed to perform as a high efficiency film forming fluoroprotein foam on hydrocarbon fires, and as “alcohol resistant” foam, creating a polymeric membrane on polar solvent fires. Fomtec FFFP ARC 3x3 provides reliable performance even on the strongest fuels. Its excellent fire performance on all kinds of flammable liquids, low or medium expansion, provides maximum security in both mobile fire fighting and stationary fire protection. -
Fomtec FFFP ARC 3x3 NV Avalanche is a high efficiency multipurpose alcohol resistant film forming fluoro protein foam (3x3) concentrate. Fomtec FFFP ARC 3x3 NV is a liquid based on environmentally friendly natural protein and does not contain any polymer that makes general AR type foam concentrates viscous. Its high fluidity makes the induction easier and accurate through both portable and fixed inline proportioners even at extremely low temperatures (-18 C). The advantage of Fomtec FFFP ARC 3x3 NV is the 3% induction ratio on all class B fires including polar solvents in fresh or seawater. The low surface tension of the water foam concentrate solution enables the aqueous film, although heavier than the burning liquid, to float on top of the hydrocarbon fuel surface. The specially selected fluorocarbon surfactants ’seal’ the bubbles against attack from polar solvents and also provide a highly effective floating foam layer on top of the polar solvents. -
Fomtec FP 3% AR is a fluoro protein foam concentrate containing fluorinated surfactants in a carefully formulated protein foam liquid base. This ensures the production of stabilized fluid foam which will cover a burning hydrocarbon fuel or polar fuel surface rapidly. The water-soluble fluorosurfactants makes the foam stable on water miscible fuels, e.g. like alcohols, ketones etc. It also make the foam repellent and reduces the amount of burning particles absorbed by the foam during the firefighting process on hydrocarbon fuels. Once the fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re-ignition and provides excellent protection against burn. Fomtec FP 3% AR should be used at 3% proportioned solution (3 part concentrate in 97 parts of water) in fresh or sea water. -
Fomtec FFFP 6% ICAO is a film forming fluoroprotein foam concentrate (FFFP) containing hydrolysed protein and preservatives, together with a blend of fluorinated surfactants to achieve the maximum synergistic effect. The blend of fluorochemicals selected is effective in reducing the surface tension of water as well as the interfacial tension between water and oil sufficiently low to give stable film on the surface of the fuel and as a result it gives fire extinguishing rates superior to those obtained with synthetic based compounds. Incorporation of protein in the formulation produces a thick visible blanket which has exceptional burnback resistance. Fomtec FFFP 6% ICAO should be used as a 6% proportioned solution in fresh or sea water. The correct proportioning or mixture ratio is 6 parts of concentrate and 94 parts of water. -
Fomtec FFFP 6% is a film forming fluoroprotein foam concentrate (FFFP) containing hydrolysed protein and preservatives, together with a blend of fluorinated surfactants to achieve the maximum synergistic effect. The blend of fluorochemicals selected is effective in reducing the surface tension of water as well as the interfacial tension between water and oil sufficiently low to give stable film on the surface of the fuel and as a result it gives fire extinguishing rates superior to those obtained with synthetic based compounds. Incorporation of protein in the formulation produces a thick visible blanket which has exceptional burnback resistance. Fomtec FFFP 6% should be used as a 6% proportioned solution in fresh or sea water. The correct proportioning or mixture ratio is 6 parts of concentrate and 94 parts of water. -
Fomtec FFFP 3% ICAO is a film forming fluoroprotein foam concentrate (FFFP) containing hydrolysed protein and preservatives, together with a blend of fluorinated surfactants to achieve the maximum synergistic effect. The blend of fluorochemicals selected is effective in reducing the surface tension of water as well as the interfacial tension between water and oil sufficiently low to give stable film on the surface of the fuel and as a result it gives fire extinguishing rates superior to those obtained with synthetic based compounds. Incorporation of protein in the formulation produces a thick visible blanket which has exceptional burnback resistance. Fomtec FFFP 3% ICAO should be used as a 3% proportioned solution in fresh or sea water. The correct proportioning or mixture ratio is 3 parts of concentrate and 97 parts of water. -
Fomtec FFFP 3% is a film forming fluoroprotein foam concentrate (FFFP) containing hydrolysed protein and preservatives, together with a blend of fluorinated surfactants to achieve the maximum synergistic effect. The blend of fluorochemicals selected is effective in reducing the surface tension of water as well as the interfacial tension between water and oil sufficiently low to give stable film on the surface of the fuel and as a result it gives fire extinguishing rates superior to those obtained with synthetic based compounds. Incorporation of protein in the formulation produces a thick visible blanket which has exceptional burnback resistance. Fomtec FFFP 3% should be used as a 3% proportioned solution in fresh or sea water. The correct proportioning or mixture ratio is 3 parts of concentrate and 97 parts of water. -
Fomtec FFFP 3% Ultra is a film forming fluoroprotein foam concentrate (FFFP) containing hydrolysed protein and preservatives, together with a blend of fluorinated surfactants to achieve the maximum synergistic effect. The blend of fluorochemicals selected is effective in reducing the surface tension of water as well as the interfacial tension between water and oil sufficiently low to give stable film on the surface of the fuel and as a result it gives fire extinguishing rates superior to those obtained with synthetic based compounds. Incorporation of protein in the formulation produces a thick visible blanket which has exceptional burnback resistance. Fomtec FFFP 3% Ultra should be used as a 3% proportioned solution in fresh or sea water. The correct proportioning or mixture ratio is 3 parts of concentrate and 97 parts of water. -
Fomtec Enviro Class A Super is a specially selected blend of high activity hydrocarbon surfactants, solvents and stabilisers for use on class A fuel fires and smaller class B fires. Enviro Class A Super does not contain any hazardous substances and does not require any special labelling when transported. -
Fomtec Enviro Class A is a specially selected blend of high activity hydrocarbon surfactants, solvents and stabilizers for use on class A fuel fires and smaller class B fires. Enviro Class A does not contain any hazardous substances and does not require any special labelling when transported. On the Qualified Products Listed (QPL) of the US Forest Service after full certification testing in accordance to Forest Service Specification 5100-307a. Conforms to NFPA 18 and NFPA 1150 -
Fomtec MB -20 is a blend of high activity, synthetic, fatty alcohol sulphates, solvents and stabilisers. Fomtec MB -20 mixed with water and converted into finished foam via low, medium or high expansion foam making equipment combats fires by engulfing the area, restricting the supply of oxygen, cooling of the liquid surface, and the suppression of flammable gases evaporating from the hot liquid surface. Used as high expansion in complete filling of enclosed rooms the foam creates an inert atmosphere. Fomtec MB-20 should be used between 2% and 6% concentration in fresh or sea water if medium or high expansion foams are required depending on equipment used. -
Fomtec MB 15 is a blend of high activity, synthetic, fatty alcohol sulphates, solvents and stabilisers. Fomtec MB 15 mixed with water and converted into finished foam via low, medium or high expansion foam making equipment combats fires by engulfing the area, restricting the supply of oxygen, cooling of the liquid surface, and the suppression of flammable gases evaporating from the hot liquid surface. Used as high expansion in complete filling of enclosed rooms the foam creates an inert atmosphere. Fomtec MB 15 should be used at 3% concentration in fresh or sea water if medium or high expansion foams are required depending on equipment used. -
Fomtec MB 5 is a blend of high activity, synthetic, fatty alcohol sulphates, solvents and stabilisers. Fomtec MB 5 mixed with water and converted into finished foam via low, medium or high expansion foam making equipment combats fires by engulfing the area, restricting the supply of oxygen, cooling of the liquid surface, and the suppression of flammable gases evaporating from the hot liquid surface. Used as high expansion in complete filling of enclosed rooms the foam creates an inert atmosphere. Fomtec MB 5 should be used between 2% and 6% concentration in fresh or sea water if medium or high expansion foams are required depending on equipment used. -
Fomtec LS EXP is an effective high expansion foam concentrate for use in any High expansion system. Fomtec LS EXP mixed with water and converted into finished foam via low, medium or high expansion foam making equipment combats fires by engulfing the area, restricting the supply of oxygen, cooling of the liquid surface, and the suppression of flammable gases evaporating from the hot liquid surface. Used as high expansion in complete filling of enclosed rooms the foam creates an inert atmosphere. Fomtec LS EXP should be used between 2% and 3% concentration in fresh or sea water if medium or high expansion foams are required depending on equipment used. -
Fomtec LS xMax is a new generation of high performing, multi-purpose foam concentrate. It is consisting of hydro-carbon surfactants blended with various solvents, preservatives and stabilizers. Fomtec LS xMax is free from fluorine surfactants. Fomtec LS xMax have been designed to be used as high expansion, medium expansion and low expansion foam systems. -
Fomtec LS aMax is a new generation of high performing, multi-purpose foam concentrate. It is consisting of fluorocarbon and hydrocarbon surfactants blended with various solvents, preservatives and stabilizers. Fomtec LS aMAx have been designed to be used as high expansion, medium expansion and low expansion foam systems. Another unique feature with Fomtec LS aMax is the alcohol resistance. -
Fomtec NXP -50 is a new generation of premixed fire fighting agents. It combines excellent extinction properties with low usage temperature. The freezing point is at -50°C. The fire performance is excellent on both Class A and Class B fires. It can be used with a wide range of foam generators, like nozzles and sprinkler heads. Due to its unique properties with combined low pour point, excellent fire performance and good shelf life it can be stored and installed in cold areas. -
Fomtec NXP -35 is a new generation of premixed fire fighting agents. It combines excellent extinction prop-erties with low usage temperature. Unlike regular AFFF premixes Fomtec NXP -35 has an excellent storage stability of at least 5 year under correct storage conditions. The fire performance is excellent on both Class A and Class B fires. It can be used with a wide range of foam generators, like nozzles and sprinkler heads. Due to its unique properties with combined low pour point, excellent fire performance and good shelf life it can be stored and installed in cold areas. -
Fomtec Alpha R is a ready-to-use alcohol resistant foam solution. Reliable fire performance is obtained on all kinds of fuels. On polar liquid fires, Fomtec Alpha R forms a polymeric layer which protects the foam against destruction. On nonpolar fuels an aqueous film is formed (AFFF-effect). Fomtec Alpha R has been designed to have a much longer shelf life than normal AFFF premix solutions. It is also an alcohol resistant foam solution that is stable for storage, unlike normal premixes made from ARC foams. It is a freeze protected foam solution, enabling foam systems to operate in areas with temperatures down to -20 °C. -
Fomtec Alpha R is a ready-to-use alcohol resistant foam solution. Reliable fire performance is obtained on all kinds of fuels. On polar liquid fires, Fomtec Alpha R forms a polymeric layer which protects the foam against destruction. On nonpolar fuels an aqueous film is formed (AFFF-effect). Fomtec Alpha R has been designed to have a much longer shelf life than normal AFFF premix solutions. It is also an alcohol resistant foam solution that is stable for storage, unlike normal premixes made from ARC foams. It is a freeze protected foam solution, enabling foam systems to operate in areas with temperatures down to -10 °C. -
Fomtec Alpha B -30 NE (also called Fomtec AB-30 NE) is a ready to use (premixed) film forming foam solution for fires of class A and B. Unlike regular AFFF premixes, Fomtec Alpha B -30 NE has excellent storage stability of at least 5 years under correct storage conditions. The product has superior fire performance on class A fires compared with regular AFFF premix solutions. Fomtec Alpha B -30 NE is freeze protected to –30oC and can be used in extinguishers or systems that will be stored / installed in cold areas. -
Fomtec Alpha B -30 (also called Fomtec AB-30) is a ready to use (premixed) film forming foam solution for fires of class A and B. Unlike regular AFFF premixes, Fomtec Alpha B -30 has excellent storage stability of at least 5 years under correct storage conditions. The product has superior fire performance on class A fires compared with regular AFFF premix solutions. Fomtec Alpha B -30 is freeze protected to –30oC and can be used in extinguishers or systems that will be stored / installed in cold areas. -
Fomtec Alpha A -35 is a new generation of premixed firefighting agents. It is a ready-to-use foam solution for extinguishing and inhibiting combustible material fires. Fomtec Alpha A is a specially selected blend of surfactants and anti-freeze agents to combine high fire performance with the low freezing point of -35°C for use on Class A fires. Fomtec Alpha A has been designed to have long shelf life. It does not contain any hazardous substances and does not require any special labelling when transported. Thanks to its unique properties with combined low pour point, high fire performance and good shelf life it can be stored and installed in cold areas. -
Fomtec Enviro USP is a fluorine-free foam consisting of selected hydrocarbon surfactants, solvents and stabilizers to give optimal fire performance. Fomtec Enviro USP is especially designed to be an effective fluorine-free alternative for sprinkler systems, type II and III discharge devices. Fomtec Enviro USP should be used at 2% with fresh water for low, medium and high expansion discharge devices. For sprinkler systems it should be used in 3% proportioning. For use on class A type fires induction ratio of 0.5-1% is recommended depending on application and discharge device. -
Fomtec Enviro 3x3 Ultra is a multi-purpose alcohol resistant fire fighting foam totally free from fluorinated surfactants and polymers. The foaming characteristics of Fomtec Enviro 3x3 Ultra allows the foam to fast spread across the burning liquid and get control of the fire. Fomtec Enviro 3x3 Ultra has been designed to work effectively on both hydrocarbon and polar fires. When applied on polar solvents a strong polymeric membrane is formed and makes it possible for the foam blanket to extinguish effectively. It also works on severe foam destroying liquids such as MTBE. Fomtec Enviro 3x3 Ultra should be used at 3% proportioned solution both on hydrocarbon liquids and polar solvents. When used with sea water the fire performance is reduced.